Strip Heaters

Strip Heaters

Features

  • The strip heater is an electrically and mechanically robust heater which is obtained by uniformly winding a fine quality nichrome ribbon shaped element on heat-resistant mica, further insulating it with mica, covering it with a metal plate, and pressure-bonding it with pressing machine.

Types

Strip Heaters (screw termination)

Configure of standard types

Strip Heaters (screw termination)

All products listed are available in different voltages.

 Voltage  Wattage  Watt density Size   Product code 
A B C
100V 50W 1.3W/cm2 210mm 128mm 185mm SH1050NT
100V 100W 1.1W/cm2 340mm 258mm 315mm SH1100NT
100V 250W 2.8W/cm2 340mm 258mm 315mm SH1250NT
100V 375W 2.7W/cm2 480mm 398mm 455mm SH1375NT
100V 500W 2.6W/cm2 610mm 528mm 585mm SH1500NT
200V 50W 1.3W/cm2 210mm 128mm 185mm SH2050NT
200V 100W 1.1W/cm2 340mm 258mm 315mm SH2100NT
200V 250W 2.8W/cm2 340mm 258mm 315mm SH2250NT
200V 375W 2.7W/cm2 480mm 398mm 455mm SH2375NT
200V 500W 2.6W/cm2 610mm 528mm 585mm SH2500NT

* The watt density of this product is for reference only.

Strip Heaters (leads termination)

Configure of standard types

Strip Heaters (leads termination)

All products listed are available in different voltages.

 Voltage  Wattage  Watt density *1 Size   Lead length Installation hole *2 Product code 
A B t
100V 100W 2.0W/cm2 275mm 18mm 4mm 250mm SH1100LT
100V 120W 4.4W/cm2 80mm 34mm 3mm 100mm φ 6.5×1 SH1120LT
100V 350W 3.6W/cm2 120mm 80mm 4mm 250mm SH1350LT
100V 400W 6.3W/cm2 90mm 70mm 4mm 250mm SH1400LT
100V 600W 6.1W/cm2 110mm 90mm 4mm 250mm SH1600LT
110V 150W 4.9W/cm2 90mm 34mm 3mm 100mm φ 6.5×2 SH1150LT
120V 60W 2.4W/cm2 50mm 50mm 4mm 250mm SH1060LT
200V 250W 4.0W/cm2 248mm 25mm 4mm 250mm SH2250LT
200V 300W 3.8W/cm2 315mm 25mm 4mm 300mm SH2300LT

*1 The watt density of this product is for reference only.

*2 Please refer to the following materials for the location of the installation holes.

Strip Heaters (leads termination) shape

Heater type

Heater type

Precautions for use

  • The watt density of this product is for reference only.
  • The exterior of this product uses bonded steel plates, so please adjust the temperature to keep the maximum temperature on the heater surface below 300℃.
    If the temperature on the heater surface exceeds 400℃, the zinc plating of the bonded steel plate may deteriorate due to heat, which may cause rusting of the underlying steel.
  • If you wish to use under the following conditions, please consult our sales representative.
    ①Use at high temperature such that the heater glows red.
    ②Use in sealed condition.
Inquiry about the products
All products listed are available in different voltages.
Please contact us for a custom designed quote and/or for any questions about our products.