“EMIFLON” is Heaters for heating chemicals made of fluororesin film. Available for heating with directly immersed in chemicals. As conventional planar heaters use silicone rubber as the insulation material, it was difficult to directly immerse them in chemical solutions and heat them due to their physical properties, but it is now possible to heat a planar heater directly in a beaker by coating it with fluororesin.
Features
- 【Excellent Weather Resistance and Chemical Resistance】
Excellent weather resistance and chemical resistance thanks to its fluororesin material. - 【Stain-resistant and clean】
Mold and dirt are less likely to occur thanks to the heater surface’s (fluororesin) excellent non-adhesive properties. - 【Heats up Quickly and Is Highly Efficient】
As it can be heated by directly immersing it in a liquid such as a chemical solution, the temperature rises quickly and is highly efficient. - 【Temperature Control Is Simple】
The built-in thermocouple makes it easy to control the temperature of chemical solutions, etc. - 【Saves Energy and Space】
The heating part is thin and can be installed at the bottom of the beaker, saving energy.
Types
50 ml & 100 ml Beaker Type
Specification
All products listed are available in different voltages.
| Operating temperature | Regular use 80℃ (liquid temperature) |
|---|---|
| Minimum liquid amount | 20 ml / 30 ml |
| Thickness of heating part | 0.7 mm |
| Diameter of heating part | 38 mm |
| Rating | 48 V 30 W |
| Power density | 4 W/cm2 |
| Lead wire length | 1,000 mm |
| Thermocouple | Type K |
| Thermal fuse | No |
| Product code | EMI 100 |
500 ml Beaker Type
Specification <PSE-Compliant Product>
All products listed are available in different voltages.
| Operating temperature | Regular use 80℃ (liquid temperature) |
|---|---|
| Minimum liquid amount | 400 ml |
| Thickness of heating part | 0.7 mm |
| Diameter of heating part | 81 mm |
| Rating | 100 V 220 W |
| Power density | 4 W/cm2 |
| Lead wire length | 1,000 mm |
| Thermocouple | Type K |
| Thermal fuse | Equipped(Thermal fuse operates at 112°C.) |
| Product code | EMI 500P |
Made-to-Order
For sizes and capacities other than the aforementioned specifications, please consult one of our sales representatives.
Reference data
* The water temperature is a test value and may differ from test results depending on the actual usage environment.
Precautions when using this product
- This heater is for heating liquids only. Do not use this heater for other forms of heating.
- Do not energize in the air (heat while a beaker is empty).
- Do not use for viscous liquids or sol liquids.
- The use of flammable liquids, oils, and petroleum is not permitted.
- Control the amount of liquid so that it does not fall below the minimum liquid level line (indicated by the surface marking ‘LOWER LEVEL’).
- The heater is covered with fluororesin, and therefore we ask that you please check its compatibility with your chemicals before use.
- As the strength of the bent part around the heat-sensitive part of the thermocouple wire is weak, do not intentionally bend it more than 90° or stretch it out flat.
