Features
- 【Quick response】
This heater is very thin at just 1 mm including heat-resistant insulation layers on both sides of the heating element, resulting in a small thermal watts.The heater thus can respond quickly to even a small temperature fluctuation. - 【High heating efficiency】
The heater has extremely high heating efficiency with less heating unevenness, because the heating elements are foil-shaped, giving a larger contact area with the surface to be heated and faster thermal diffusion compared to the conventional wiring elements. - 【Homogeneous temperature distribution】
In general, the temperature of the peripheral part of a heater tends to be lower than that of the center part. However, this revolutionary heater corrects this problem to provide a homogeneous temperature gradient to suit the application, by using sophisticated photoetching technology to create heating elements with a precise power density design. - 【Designability】
Regardless of the shape of the object to be heated such as a flat surface, curved surface, etc., it can be bonded and used. Thus, the heater is safe and easy to handle owing to its density over a wide range of resistance values of heating element in order to obtain a predetermined temperature distribution, capability of containing a plurality of heater circuits on the same heater surface, and free combination of thermal fuses, thermostats, and various temperature controllers. - 【Reliable materials】
Accurate heating elements by etching technology and heat-resistant insulating materials certified by UL/CSA are used.
Types
Square and Rectangle types
Specification
| Operating temperature range | -55 to +230℃ |
|---|---|
| Voltage | AC100V / AC200V |
| Capacity tolerance | ±10% |
| Insulation resistance | 100 MΩ or more with a 500 VDC ohmmeter |
| Dielectric strength | 150V or less: 1000V/min. (100V) 150V or more: 1500V/min. (200V) |
| Thickness | 1mm |
| Lead wire length | 200mm±20 |
Configure of standard types
All products listed are available in different voltages.
| Size (Width ×Length) |
Voltage | Wattage | Watt Densities | Product code |
|---|---|---|---|---|
| W23 ✕ L100 mm | 100V | 20W | 0.9W/cm2 | SAM0210 |
| W30 ✕ L100 mm W30 ✕ L200 mm W30 ✕ L300 mm W30 ✕ L400 mm |
100V 100V 100V 100V |
30W 60W 90W 120W |
1.0W/cm2 1.0W/cm2 1.0W/cm2 1.0W/cm2 |
SAM0310 SAM0320 SAM0330 SAM0340 |
| W50 ✕ L50 mm W50 ✕ L100 mm W50 ✕ L200 mm W50 ✕ L300 mm W50 ✕ L400 mm |
100V 100V 100V 100V 100V |
30W 50W 100W 120W 140W |
1.2W/cm2 1.0W/cm2 1.0W/cm2 0.8W/cm2 0.7W/cm2 |
SAM055 SAM0510 SAM0520 SAM0530 SAM0540 |
| W70 ✕ L100 mm W70 ✕ L200 mm W70 ✕ L300 mm W70 ✕ L400 mm |
100V 100V 100V 100V |
70W 140W 200W 250W |
1.0W/cm2 1.0W/cm2 1.0W/cm2 0.9W/cm2 |
SAM0710 SAM0720 SAM0730 SAM0740 |
| W100 ✕ L100 mm W100 ✕ L200 mm W100 ✕ L300 mm W100 ✕ L400 mm |
100V 100V 100V 100V |
100W 200W 260W 300W |
1.0W/cm2 1.0W/cm2 0.9W/cm2 0.8W/cm2 |
SAM1010 SAM1020 SAM1030 SAM1040 |
| W130 ✕ L100 mm W130 ✕ L200 mm W130 ✕ L300 mm W130 ✕ L400 mm |
100V 100V 100V 100V |
130W 260W 330W 430W |
1.0W/cm2 1.0W/cm2 0.8W/cm2 0.8W/cm2 |
SAM1310 SAM1320 SAM1330 SAM1340 |
| W150 ✕ L100 mm W150 ✕ L200 mm W150 ✕ L300 mm W150 ✕ L400 mm |
100V 100V 100V 100V |
150W 300W 400W 550W |
1.0W/cm2 1.0W/cm2 0.9W/cm2 0.9W/cm2 |
SAM1510 SAM1520 SAM1530 SAM1540 |
| W50 ✕ L100 mm W50 ✕ L200 mm W100 ✕ L100 mm W100 ✕ L200 mm |
200V 200V 200V 200V |
50W 100W 100W 200W |
1.0W/cm2 1.0W/cm2 1.0W/cm2 1.0W/cm2 |
SAM05102 SAM05202 SAM10102 SAM10202 |
Round type
Specification
| Operating temperature range | -55 to +230℃ |
|---|---|
| Voltage | AC100V / AC200V |
| Capacity tolerance | ±10% |
| Insulation resistance | 100 MΩ or more with a 500 VDC ohmmeter |
| Dielectric strength | 150 V or less: 1000 V/min. (100 V) 150 V or more: 1500 V/min. (200 V) |
| Thickness | 1mm |
| Lead wire length | 200mm±20 |
Configure of standard types
All products listed are available in different voltages.
| Size | Voltage | Wattage | Watt Densities | Product code |
|---|---|---|---|---|
| φ80 | 100V | 50W | 1.0W/cm2 | SAM80M |
| φ100 | 100V | 80W | 1.0W/cm2 | SAM100M |
| φ120 | 100V | 110W | 1.0W/cm2 | SAM120M |
Precautions when using this product
- This product is for industrial use only.
- The product is intended for indoor use; it does not have a waterproof design. Keep the heater out of water and any solutions.
- Beware it may cause an abnormally high temperature and result in premature wire breakage if the contact with the heated object is poor.
- If using the heater sandwiched by metal blocks, contact our sales representative.
- Do not apply excessive external forces (tension, bending, etc.) to the lead wire joint.
- Do not place flammable material near the heater. It could result in a fire.
- Do not stack heaters on top of each other. It may cause an abnormally high temperature and result in premature wire breakage.
- Depending on the usage, use a voltage or temperature controller and perform temperature control with the surface temperature of the heater.