* The name of SAMICON "420" does not stand for the temperature for the heater to be endured in running use.
Features
- 【Higher operating temperature】
our special insulation material can provide continuous operating temperature 350 deg.C, maximum 400 deg.C. * - 【Rapid heating up and rapid cooling down】
Its thin construction and light weight enable to perform rapid heating response and ecient operation. - 【Homogeneous temperature distribution】
Etched and patterned foil elements provide with homogeneous temperature on its surface. - 【Lager operating area / Flexible in wattage requirement】
Etched foil elements provide better thermal efficiency than wiring elements. - 【Lead-free】
No solder is used.
* The value of continuous operating temperature 350 deg.C, is based on our internal evaluation.
Specification
All products listed are available in different voltages.
| Heater surface temperature | 400deg.C, (Continuous operation 350deg.C, Maximum 400deg.C) |
|---|---|
| Voltage | ~ AC200V±10% |
| Watt Densities | Max:1.8W/cm2 at suspended in air, Max:2.0W/cm2 at attached to parts. Flexibility allows in a variety of watt density depending on the application. |
| Insulation resistance | DC500V 100MΩ or more |
| Dielectric strength | AC1000V / 1min.(Rated voltage is less than 150V), AC1500V / 1min.(Rated voltage is more than 150V) |
| Thickness | Less than 1.5mm (Excude terminal thickness) |
| Heater size limitations | 350 ✕ 900 mm |
Precautions when using this product
- This product is for industrial use only.
- Ask us if the heater is be used in the way to bond with the material to be heated.
- SAMICON 420 is not allowed to operate under the condition where to expose to the water or high humid area.
- Operable temperature depends on your surrounding conditions such as appliance and/or application.
- If you have any questions, please free to ask your sales distributor or directly.